H3C Technologies H3C S3100 Series Switches - Manual (Page 798)

1-12
Setting to Output System Information to the Trap Buffer
Table 1-13 Set to output system information to the trap buffer
Operation Command Description
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable system information output
to the trap buffer
info-center trapbuffer [channel
{ channel-number | channel-name }
| size buffersize]*
Optional
By default, the switch uses
information channel 3 to output
trap information to the trap buffer,
which can holds up to 256 items by
default.
Configure the output rules of
system information
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
Optional
Refer to Table 1-8 for the default
output rules of system information.
Set the format of time stamp in the
output information
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Optional
By default, the time stamp format
of the output trap information is
date.
Setting to Output System Information to the Log Buffer
Table 1-14 Set to output system information to the log buffer
Operation Command Description
Enter system view system-view —
Enable the information center info-center enable
Optional
Enabled by default.
Enable information output to the
log buffer
info-center logbuffer [ channel
{ channel-number | channel-name }
| size buffersize ]*
Optional
By default, the switch uses
information channel 4 to output log
information to the log buffer, which
can holds up to 512 items by
default.
Configure the output rules of
system information
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
Optional
Refer to Table 1-8 for the default
output rules of system information.
Set the format of time stamp in the
output information
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Optional
By default, the time stamp format
of the output log information is
date.