H3C Technologies H3C S3100 Series Switches - Manual (Page 884)

1-16
To do… Use the command… Remarks
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be executed in
any view.
8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing
client function
hwping-agent enable
Required
By default, the HWPing client function is disabled.
Create an HWPing test
group and enter its view
hwping
administrator-name
operation- tag
Required
By default, no test group is configured.
Configure the test type
test-type { udpprivate |
udppublic } Required
By default, the test type is ICMP.
Configure the
destination address
destination-ip ip-address
Required
This IP address and the one configured on the
HWPing server for listening service must be the same.
By default, no destination address is configured.
Configure the
destination port destination-port
port-number
z Required in a Udpprivate test
z A Udppublic test is a UDP connection test on port
7. Use the hwping-server udpecho ip-address 7
command on the server to configure the listening
service port; otherwise the test will fail. No port
number needs to be configured on the client; any
destination port number configured on the client
will not take effect.
z By default, no destination port number is
configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP address is configured.
Configure the source
port
source-port port-number
Optional
By default, no source port is specified.
Configure the number of
probes per test
count times
Optional
By default, one probe is made per test.
Configure the data
packet size
datasize size
Optional
By default, the data packet size is 100 bytes.
Configure a stuffing
character string
datafill string
Optional
By default, the numbers between 0 and 255 are
stuffed into datagrams in a cyclically way.
Configure a test
description
description string
Optional
By default, no description information is configured.
Configure the maximum
number of history
records that can be
saved
history-records number
Optional
By default, the maximum number is 50.