H3C Technologies H3C S7500E Series Switches - Manual (Page 379)

13-4
Displaying and Maintaining QoS Policies
To do… Use the command… Remarks
Display user-defined QoS policy
configuration information
display qos policy user-defined
[ policy-name [ classifier
tcl-name ] ]
Available in any view
Display QoS policy configuration
on the specified or all interfaces
display qos policy interface
[ interface-type interface-number ]
[ inbound ]
Available in any view
Display VLAN QoS policy
configuration on a distributed
device
display qos vlan-policy { name
policy-name | vlan vlan-id } [ slot
slot-number ] [ inbound |
outbound ]
Available in any view
Display VLAN QoS policy
configuration on a distributed IRF
device
display qos vlan-policy { name
policy-name | vlan [ vlan-id ] }
[ chassis chassis-number slot
slot-number ] [ inbound |
outbound ]
Available in any view
Display information about global
QoS policies on a distributed
device
display qos policy global [ slot
slot-number ] [ inbound |
outbound ]
Available in any view
Display information about global
QoS policies on a distributed IRF
device
display qos policy global
[ chassis chassis-number slot
slot-number ] [ inbound |
outbound ]
Available in any view
Policy Routing Configuration Examples
IPv4 Policy Routing Configuration Example
Network requirements
As shown in Figure 13-1 , redirect all packets received on GigabitEthernet 2/0/1 of Switch A to the next
hop 202.1.1.2.