Configuration procedure – H3C Technologies H3C S7500E Series Switches User Manual

Page 369

12-12

Figure 12-1 Network diagram for route policy application to route redistribution

Configuration procedure

1) Specify IP addresses for interfaces (omitted).

2) Configure

IS-IS.

# Configure Switch C.

system-view

[SwitchC] isis

[SwitchC-isis-1] is-level level-2

[SwitchC-isis-1] network-entity 10.0000.0000.0001.00

[SwitchC-isis-1] quit

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] isis enable

[SwitchC-Vlan-interface200] quit

[SwitchC] interface vlan-interface 201

[SwitchC-Vlan-interface201] isis enable

[SwitchC-Vlan-interface201] quit

[SwitchC] interface vlan-interface 202

[SwitchC-Vlan-interface202] isis enable

[SwitchC-Vlan-interface202] quit

[SwitchC] interface vlan-interface 203

[SwitchC-Vlan-interface203] isis enable

[SwitchC-Vlan-interface203] quit

# Configure Switch B.

system-view

[SwitchB] isis

[SwitchB-isis-1] is-level level-2

[SwitchB-isis-1] network-entity 10.0000.0000.0002.00

[SwitchB-isis-1] quit

[SwitchB] interface vlan-interface 200

[SwitchB-Vlan-interface200] isis enable

[SwitchB-Vlan-interface200] quit

3) Configure OSPF and route redistribution

# Configure OSPF on Switch A.

system-view

[SwitchA] ospf

This manual is related to the following products: