H3C Technologies H3C S7500E Series Switches - Manual (Page 328)

10-5
To do… Use the command… Remarks
Display SPF log information
display isis spf-log [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Display the statistics of the IS-IS
process
display isis statistics [ level-1 | level-1-2 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Clear all IS-IS data structure
information
reset isis all [ process-id | vpn-instance
vpn-instance-name ]
Available in user view
Clear the IS-IS data information of
a neighbor
reset isis peer system-id [ process-id |
vpn vpn-instance-name ]
Available in user view
IPv6 IS-IS Configuration Example
Network requirements
As shown in Figure 10-1 , Switch A, Switch B, Switch C and Switch D reside in the same autonomous
system, and all are enabled with IPv6.
Switch A and Switch B are Level-1 switches, Switch D is a Level-2 switch, and Switch C is a Level-1-2
switch. Switch A, Switch B, and Switch C are in area 10, while Switch D is in area 20.
Figure 10-1 Network diagram for IPv6 IS-IS basic configuration
Configuration procedure
1) Configure IPv6 addresses for interfaces (omitted)
2) Configure IPv6 IS-IS
# Configure Switch A.
system-view
[SwitchA] ipv6
[SwitchA] isis 1
[SwitchA-isis-1] is-level level-1
[SwitchA-isis-1] network-entity 10.0000.0000.0001.00
[SwitchA-isis-1] ipv6 enable