beautypg.com

H3C Technologies H3C S7500E Series Switches User Manual

Page 318

background image

9-23

[SwitchA] interface Vlan-interface 100

[SwitchA-Vlan-interface100] ospfv3 dr-priority 100

[SwitchA-Vlan-interface100] quit

# Configure the DR priority of VLAN-interface 200 as 0 on Switch B.

[SwitchB] interface vlan-interface 200

[SwitchB-Vlan-interface200] ospfv3 dr-priority 0

[SwitchB-Vlan-interface200] quit

# Configure the DR priority of VLAN-interface 100 of Switch C as 2.

[SwitchC] interface Vlan-interface 100

[SwitchC-Vlan-interface100] ospfv3 dr-priority 2

[SwitchC-Vlan-interface100] quit

# Display neighbor information on Switch A. You can find DR priorities have been updated, but the DR

and BDR are not changed.

[SwitchA] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

2.2.2.2 0 2-Way/DROther 00:00:38 Vlan200 0

3.3.3.3 2 Full/Backup 00:00:32 Vlan100 0

4.4.4.4 1 Full/DR 00:00:36 Vlan200 0

# Display neighbor information on Switch D. You can find Switch D is still the DR.

[SwitchD] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

1.1.1.1 100 Full/DROther 00:00:33 Vlan100 0

2.2.2.2 0 Full/DROther 00:00:36 Vlan200 0

3.3.3.3 2 Full/Backup 00:00:40 Vlan100 0

4) Restart DR/BDR election

# Use the shutdown and undo shutdown commands on interfaces to restart DR/BDR election

(omitted).

# Display neighbor information on Switch A. You can find Switch C becomes the BDR.

[SwitchA] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

2.2.2.2 0 Full/DROther 00:00:31 Vlan200 0

3.3.3.3 2 Full/Backup 00:00:39 Vlan100 0

4.4.4.4 1 Full/DROther 00:00:37 Vlan200 0

# Display neighbor information on Switch D. You can find Switch A becomes the DR.

[SwitchD] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

1.1.1.1 100 Full/DR 00:00:34 Vlan100 0

2.2.2.2 0 2-Way/DROther 00:00:34 Vlan200 0

3.3.3.3 2 Full/Backup 00:00:32 Vlan100 0