H3C Technologies H3C S7500E Series Switches - Manual (Page 182)

5-37
To do… Use the command… Remarks
Enable IS-IS, and enter
IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
Required
Disabled by default
Enable the GR capability
for IS-IS
graceful-restart
Required
Disabled by default
Set the Graceful Restart
interval
graceful-restart interval timer
Required
300 seconds by default
Suppress the SA bit
during restart
graceful-restart suppress-sa
Optional
By default, the SA bit is not suppressed.
Enabling the Logging of Neighbor State Changes
Follow these steps to enable the logging of neighbor state changes:
To do… Use the command… Remarks
Enter system view system-view ––
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
––
Enable the logging of neighbor
state changes
log-peer-change
Required
Enabled by default
With this feature enabled, the router delivers information about neighbor state changes to the terminal
for display.
Enabling IS-IS SNMP Trap
Follow these steps to enable IS-IS SNMP trap:
To do… Use the command… Remarks
Enter system view system-view ––
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
––