H3C Technologies H3C S7500E Series Switches - Manual (Page 367)

12-10
To do… Use the command… Remarks
Set the extended community
attribute for BGP routing
apply extcommunity { rt
{ as-number:nn |
ip-address:nn } }&<1-16>
[ additive ]
Optional
Not set by default.
for IPv4 routes
apply ip-address next-hop
ip-address
Optional
Not set by default.
The setting does not apply to
redistributed routing information.
Set the next
hop
for IPv6 routes apply ipv6 next-hop ipv6-address
Optional
Not set by default.
The setting does not apply to
redistributed routing information.
Inject routing information to a
specified ISIS level
apply isis { level-1 | level-1-2 |
level-2 }
Optional
Not configured by default.
Set the local preference for BGP
routing information
apply local-preference preference
Optional
Not set by default.
Set MPLS label apply mpls-label
Optional
Not set by default.
Set the origin attribute for BGP
routing information
apply origin { egp as-number | igp
| incomplete }
Optional
Not set by default.
Set the preference for the routing
protocol
apply preference preference
Optional
Not set by default.
Set a preferred value for BGP
routing information
apply preferred-value
preferred-value
Optional
Not set by default.
Set a tag value for RIP, OSPF or
IS-IS routing information
apply tag value
Optional
Not set by default.