H3C Technologies H3C S7500E Series Switches - Manual (Page 348)

11-19
To do… Use the command… Remarks
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —
Create an iBGP peer group
group ipv6-group-name
[ internal ]
Required
Add a peer into the group
peer ipv6-address group
ipv6-group-name [ as-number
as-number ]
Required
Not added by default
Creating a pure eBGP peer group
Follow these steps to configure a pure eBGP group:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —
Create an eBGP peer group group ipv6-group-name external Required
Configure the AS number for the
peer group
peer ipv6-group-name as-number
as-number
Required
Not configured by default.
Add an IPv6 peer into the peer
group
peer ipv6-address group
ipv6-group-name
Required
Not added by default
z To create a pure eBGP peer group, you need to specify an AS number for the peer group.
z If a peer was added into an eBGP peer group, you cannot specify any AS number for the peer
group.
Creating a mixed eBGP peer group
Follow these steps to create a mixed eBGP peer group:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —