H3C Technologies H3C S7500E Series Switches - Manual (Page 183)

5-38
To do… Use the command… Remarks
Enable SNMP trap is-snmp-traps enable
Required
Enabled by default
Binding an IS-IS Process with MIBs
Follow these steps to bind an IS-IS process with MIBs:
To do… Use the command… Remarks
Enter system view system-view —
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
—
Bind the IS-IS process with MIBs isis mib-binding process-id
Required
By default, MIBs are bound with
IS-IS process 1.
Configuring BFD for IS-IS
Follow these steps to enable BFD on an IS-IS interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Enable IS-IS on the interface isis enable [ process-id ]
Required
Disabled by default
Enable BFD on the IS-IS interface isis bfd enable
Required
Not enabled by default
For details about IS-IS, see IS-IS Configuration in the Layer 3 - IP Routing Configuration Guide.