H3C Technologies H3C S7500E Series Switches - Manual (Page 327)

10-4
z The ipv6 filter-policy export command is usually used in combination with the ipv6
import-route command. If no protocol is specified for the ipv6 filter-policy export command,
routes redistributed from all routing protocols are filtered before advertisement. If a protocol is
specified, only routes redistributed from the routing protocol are filtered for advertisement.
z For information about ACL, see ACL Configuration in the ACL and QoS Configuration Guide.
z For information about routing policy and IPv6 prefix list, see Routing Policy Configuration in the
Layer 3 - IP Routing Configuration Guide.
Displaying and Maintaining IPv6 IS-IS
To do… Use the command… Remarks
Display brief IPv6 IS-IS information display isis brief Available in any view
Display the status of the debug
switches
display isis debug-switches { process-id |
vpn-instance vpn-instance-name }
Available in any view
Display IS-IS enabled interface
information
display isis interface [ statistics |
[ interface-type interface-number ]
[ verbose ] ] [ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display IS-IS license information display isis license Available in any view
Display LSDB information
display isis lsdb [ [ l1 | l2 | level-1 |
level-2 ] | [ [ lsp-id lsp-id | lsp-name
lspname | local ] | verbose ] * ] *
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display IS-IS mesh group
information
display isis mesh-group [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Display the mapping table
between the host name and
system ID
display isis name-table [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Display IS-IS neighbor information
display isis peer [ statistics | verbose ]
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display IPv6 IS-IS routing
information
display isis route ipv6 [ [ level-1 | level-2 ]
| verbose ] * [ process-id ]
Available in any view