Configuration procedure – H3C Technologies H3C S7500E Series Switches User Manual

Page 313

9-18

Figure 9-2 Network diagram for OSPFv3 area configuration

Configuration procedure

1) Configure IPv6 addresses for interfaces (omitted)

2) Configure OSPFv3 basic functions

# Configure Switch A.

system-view

[SwitchA] ipv6

[SwitchA] ospfv3

[SwitchA-ospfv3-1] router-id 1.1.1.1

[SwitchA-ospfv3-1] quit

[SwitchA] interface vlan-interface 300

[SwitchA-Vlan-interface300] ospfv3 1 area 1

[SwitchA-Vlan-interface300] quit

[SwitchA] interface vlan-interface 200

[SwitchA-Vlan-interface200] ospfv3 1 area 1

[SwitchA-Vlan-interface200] quit

# Configure Switch B.

system-view

[SwitchB] ipv6

[SwitchB] ospfv3

[SwitchB-ospf-1] router-id 2.2.2.2

[SwitchB-ospf-1] quit

[SwitchB] interface vlan-interface 100

[SwitchB-Vlan-interface100] ospfv3 1 area 0

[SwitchB-Vlan-interface100] quit

[SwitchB] interface vlan-interface 200

[SwitchB-Vlan-interface200] ospfv3 1 area 1

[SwitchB-Vlan-interface200] quit

# Configure Switch C.

system-view

[SwitchC] ipv6

[SwitchC] ospfv3

[SwitchC-ospfv3-1] router-id 3.3.3.3

[SwitchC-ospfv3-1] quit

[SwitchC] interface vlan-interface 100

[SwitchC-Vlan-interface100] ospfv3 1 area 0

This manual is related to the following products: