beautypg.com

H3C Technologies H3C S7500E Series Switches User Manual

Page 174

background image

5-29

2) Specify the LSP refresh interval and generation interval

Each router needs to refresh LSPs generated by itself at a configurable interval and send them to other

routers to prevent valid routes from being aged out. A smaller refresh interval speeds up network

convergence but consumes more bandwidth.

When the network topology changes, for example, a neighbor is down/up, or the interface metric,

system ID or area ID is changed, the router generates an LSP after a configurable interval. If such

changes occur frequently, excessive LSPs are generated, consuming a large amount of router

resources and bandwidth; in this case, you can adjust the LSP generation interval.

Follow these steps to specify the LSP refresh interval and generation interval:

To do…

Use the command…

Remarks

Enter system view

system-view

––

Enter IS-IS view

isis [ process-id ] [ vpn-instance

vpn-instance-name ]

––

Specify the LSP refresh

interval

timer lsp-refresh seconds

Optional

900 seconds by

default

Specify the LSP generation

interval

timer lsp-generation maximum-interval

[ initial-interval [ second-wait-interval ] ] [ level-1 |

level-2 ]

Optional

2 seconds by default

3) Specify LSP sending intervals

If a change occurs in the LSDB, IS-IS advertises the changed LSP to neighbors. You can specify the

minimum interval for sending such LSPs.

On a P2P link, IS-IS requires an advertised LSP be acknowledged. If no acknowledgement is received

within a configurable interval, IS-IS will retransmit the LSP.

Follow these steps to configure LSP sending intervals:

To do…

Use the command…

Remarks

Enter system view

system-view

––

Enter interface view

interface interface-type

interface-number

––

Specify the minimum interval for

sending LSPs and the maximum

LSP number that can be sent at a

time

isis timer lsp time [ count

count ]

Optional

By default, the minimum interval is 33

milliseconds, and the maximum LSP

number that can be sent at a time is 5.

Specify the LSP retransmission

interval on a P2P link

isis timer retransmit seconds

Optional

5 seconds by default