H3C Technologies H3C S7500E Series Switches - Manual (Page 349)

11-20
To do… Use the command… Remarks
Create an eBGP peer group group ipv6-group-name external Required
Specify the AS number of an IPv6
peer
peer ipv6-address as-number
as-number
Required
Not specified by default.
Add the IPv6 peer into the peer
group
peer ipv6-address group
ipv6-group-name
Required
Not added by default
When creating a mixed eBGP peer group, you need to create a peer and specify its AS number that
can be different from AS numbers of other peers, but you cannot specify AS number for the eBGP peer
group.
Configuring IPv6 BGP Community
Advertise community attribute to an IPv6 peer/peer group
Follow these steps to advertise community attribute to an IPv6 peer/peer group:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —
Advertise community attribute to
an IPv6 peer/peer group
peer { ipv6-group-name |
ipv6-address }
advertise-community
Required
Not advertised by default.
Advertise extended community
attribute to an IPv6 peer/peer
group
peer { ipv6-group-name |
ipv6-address }
advertise-ext-community
Required
Not advertised by default.
Apply a routing policy to routes advertised to a peer/peer group
Follow these steps to apply a routing policy to routes advertised to a peer/peer group:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —