H3C Technologies H3C S7500E Series Switches - Manual (Page 337)

11-8
To do… Use the command… Remarks
Enable route redistribution from another
routing protocol
import-route protocol [ process-id ] [ med
med-value | route-policy
route-policy-name ] *
Required
Not enabled by
default.
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.
Configuring IPv6 BGP Route Summarization
To reduce the routing table size on medium and large BGP networks, you need to configure route
summarization on BGP routers. BGP supports only manual summarization of IPv6 routes.
Follow these steps to configure IPv6 BGP route summarization:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family
view
ipv6-family —
Configure manual route
summarization
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ] *
Required
Not configured by
default.
Advertising a Default Route to an IPv6 Peer/Peer Group
Follow these steps to advertise a default route to an IPv6 peer/peer group:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —