H3C Technologies H3C S7500E Series Switches - Manual (Page 336)

11-7
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enable logging of peer changes
globally
log-peer-change
Optional
Enabled by default.
Enter IPv6 address family view ipv6-family —
Enable the state change logging
for an IPv6 peer or peer group
peer { ipv6-group-name |
ipv6-address } log-change
Optional
Enabled by default.
See BGP Configuration Commands in the Layer 3 - IP Routing Command Reference for information
about the log-peer-change command.
Controlling Route Distribution and Reception
The task includes routing information filtering, routing policy application and route dampening.
Prerequisites
Before configuring this task, you need to:
z Enable IPv6
z Configure the IPv6 BGP basic functions
Configuring IPv6 BGP Route Redistribution
Follow these steps to configure IPv6 BGP route redistribution:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 address family view ipv6-family —
Enable default route redistribution into the
IPv6 BGP routing table
default-route imported
Optional
Not enabled by
default.