H3C Technologies H3C S7500E Series Switches - Manual (Page 103)

4-34
Configuring the Maximum Number of OSPF Routes
Follow these steps to configure the maximum number of routes:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
—
Configure the maximum number of
OSPF routes
maximum-routes { external | inter | intra }
number
Optional
The default value
depends on the SRPU
models, LPU models,
and their working modes.
Configuring the Maximum Number of Load-balanced Routes
If several routes with the same cost to the same destination are available, configuring them as
load-balanced routes can improve link utilization.
Follow these steps to configure the maximum number of load-balanced routes:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
—
Configure the maximum number of
equivalent load-balanced routes
maximum load-balancing maximum
Optional
The value defaults to 8.
Configuring a Priority for OSPF
A router may run multiple routing protocols, and it sets a priority for each protocol. When a route found
by several routing protocols, the route found by the protocol with the highest priority will be selected.
Follow these steps to configure a priority for OSPF:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id router-id
| vpn-instance instance-name ] *
—