H3C Technologies H3C S7500E Series Switches - Manual (Page 114)

4-45
To do… Use the command… Remarks
Enable OSPF trap
generation
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail | ifcfgerror |
ifrxbadpkt | ifstatechange |
iftxretransmit | lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifcfgerror | virifauthfail | virifrxbadpkt |
virifstatechange | viriftxretransmit |
virnbrstatechange ] *
Optional
Enabled by default
Enabling Message Logging
Follow these steps to enable message logging:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
—
Enable message logging enable log [ config | error | state ]
Required
Not enabled by default.
Enabling the Advertisement and Reception of Opaque LSAs
With this feature enabled, the OSPF router can receive and advertise Type 9, Type 10 and Type 11
opaque LSAs.
Follow these steps to enable the advertisement and reception of opaque LSAs:
To do… Use the command… Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
—
Enable the advertisement and
reception of opaque LSAs
opaque-capability enable
Optional
Disabled by default
Configuring OSPF to Give Priority to Receiving and Processing Hello Packets
To ensure OSPF runs normally, a router receives and processes Hello packets and other protocol
packets at the same time. When the router has established neighbor relationships with multiple