H3C Technologies H3C S7500E Series Switches - Manual (Page 251)

6-48
Resetting BGP Connections
To do… Use the command… Remarks
Reset all BGP connections reset bgp all
Reset the BGP connections to an AS reset bgp as-number
Reset the BGP connection to a peer reset bgp ip-address [ flap-info ]
Reset all eBGP connections reset bgp external
Reset the BGP connections to a peer group reset bgp group group-name
Reset all iBGP connections reset bgp internal
Reset all IPv4 unicast BGP connections reset bgp ipv4 all
Available in user
view
Clearing BGP Information
To do… Use the command… Remarks
Clear dampened MBGP routing
information and release suppressed
routes
reset bgp dampening [ ip-address [ mask |
mask-length ] ]
Clear route flap information
reset bgp flap-info [ ip-address [ mask-length |
mask ] | as-path-acl as-path-acl-number |
regexp as-path-regular-expression ]
Available in
user view
BGP Configuration Examples
BGP Basic Configuration
Network requirements
In the following network, run eBGP between Switch A and Switch B and iBGP between Switch B and
Switch C so that Switch C can access the network 8.1.1.0/24 connected to Router A.