Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 94)

Configuring Access Manager
4-8 Access Manager 2000 User Manual
Is Printer 80-Column Wide?
The Is Printer 80-Column Wide? data entry field appears in
the Edit Report Printer Configuration screen. If you
enter Y , the type may be compressed to print 132 columns on 8.5-inch
paper, if supported by the printer type. Only those reports over 80
columns wide are compressed. Otherwise, the printer is set for 80
columns only. The number of lines is always 66.
When you are satisfied with the menu options and want to save them and
exit from the Installation Menu, press
. Or, press to exit this
menu without saving the changes. Records beyond the quota are deleted
from the database when the
key is pressed.
The on-line printer is the printer that prints the performance analysis and
bar charts from information in the elements (cards) themselves. This
information can be viewed from in the On-line Access Menu.
To configure the report printer:
■
From the Installation Menu select On-line . The Edit On-line
Printer Configuration screen appears.
This screen defines where the on-line information is printed and what
type of printer is used. The selections and menu are the same as in the
Edit Report Printer option described in the previous section.
Refer to that section for an explanation of the menus and choices.
You can specify whether alarm reports go to a printer, file, or a computer.
This is done through the Edit Alarm Destination screen.
F5 F2
F5
Configuring the
on-line data printer
Specifying the
alarm destination