Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 25)

Summary of Access Manager changes
Access Manager 2000 User Manual xxi
For information about Access Manag er2000 not covered in this manual,
call Verilink Field Service, (408) 945-1199.
Summary of Access Manager changes
Following are the highlights of Revision 1.3 changes to Access
Manager 2000.
1. Access Manager 2000 packages have been renamed:
2. Option for enabling and disabling the update of NCC (CCC)
real-time clock when configuring the node or polling the node.
3. X.25 PAD (Packet Assembler Disassembler) support for NCCs with
Revision 4.22 or higher firmware. Verilink equipment has been
tested extensively with the NET TX7000 PAD.
4. Support for 9600 baud modem which adhere to the Hayes command
set. For NCCs with Revision 4.22 or higher firmware.
5. Alternate Alarm Path functionality for nodes. Supported by
assigning the Access Manager PC a Manager ID (identifier) in the
Utilities/Installation/Site screen.
6. In CSU configuration, the PRM (Performance Report Message)
option now supports SMDS (Switched Multi-megabit Data Service).
7. Support for TACs LOS of External Clock alarm. This is reflected in
the Online/Status-Element and Online/Circuit Status Diag screens.
8. Access Manager will now track up to thirtee n DIU2130s (Data
Interface Units) with tests in progress.
Old Name Old Capacity New Name New Capacity
Performance 14 AM2000-8 8
Insight 40 AM2000-24 24
Signature unlimited AM2000-1000 unlimited