Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 307)

Computing statistics
Access Manager 2000 User Manual 8-37
■
The percentage of error-free seconds is calculated by dividing error-
free seconds by available seconds.
The Telco Statistics display is the same as the User Statistics display,
except that the analysis is based on the performance data in the Telco
registers, rather than in the User registers.
To access User or Telco Statistics:
1. When you get the On-line Access screen, select either USER
Statistics or Telco Statistics .
2. The CSU statistics screen appears.
View all the CSUs in the range.
To access the previous or next CSU circuit element in the range you
have selected, use the
and key
combinations, respectively.
To display the registers of a CSU at the far end via the ESF Data
Link, press
after accessing the near-end CSU circuit
element.
3. This completes the User/Telco Statistics procedure.
Ctrl
PgUp
Ctrl
PgDn
Ctrl