Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 180)

Configuring the T1 Network
5-56 Access Manager 2000 User Manual
5. Enter the range and press . This saves the information to the
database.
To view a circuit element definition:
1. Starting from the Main Menu, select Configuration .
2. From the Configuration Menu, select Element . The Edit Element:
Select Parent Node screen now appears. If this menu has no nodes
listed, no nodes have yet been configured.
3. After the parent node has been selected, depending on the type of
node, one of the configuration actions menus will appear. See the
following figures:
• Figure 5 -7, “Configuration: 551VST List 2 Menu,” on pag e5-45
• Figure 5 -8, “Configuration: 551VST-ML List 2 Menu,” on
page 5-46
• Figure 5 -9, “Configuration: AS2000 Menu,” on page 5 -46
4. Select the View option. This option allows you to view an existing
circuit element definition without changing it.
For a selected parent node, you can print out a report listing all
parameters for that node’s circuit elements. The report goes to the printer
defined in the Report screen of the Utilities Menu.
To print out a node’s circuit element definitions:
1. Starting from the Main Menu, select Configuration .
2. From the Configuration Menu, select Element . The Edit Element:
Select Parent Node screen now appears.
If this menu has no nodes listed, no nodes have yet been configured.
3. Select the parent node has been selected. One of the configuration
action menus appears. The menu that appears depends on the type of
node being used. See the following figures to see which menu
should appear for your type of module:
F5
Viewing circuit
element definitions
Printing all circuit
element definitions