Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual

Page 57

Software Installation

Access Manager 2000 User Manual

2-7

To copy the

CONFIG.SYS

file to the root directory of the boot drive:

1. Type

and press

to return to the boot drive.

2. Type

CD\

and press to return to the root directory on the

boot drive.

3. Insert

Diskette #1 of Access Manager 2000 into drive A.

4. At the boot drive prompt, type

COPY A: CONFIG.SYS

and

press .

The

CONFIG.SYS

file is created in the root directory.

5. Remove the diskette from drive A.

Note:

The new values for FILES and BUFFERS are not in effect until
the host PC is rebooted and DOS is restarted.

6. Reboot your system to activate the new values before starting

Access Manager. Otherwise, you will not be able to log into Access
Manager.

To modify an

existing

CONFIG.SYS

file:

The existing

CONFIG.SYS

file must be modified if it does not contain

FILES=24 (or greater) and BUFFERS = 20 (or greater).

1. Modify the

CONFIG.SYS

file with EDLIN (the text editor for

DOS) or with any text editor or word processor with an ASCII text
editor option.

2. Reboot the system after you change the

CONFIG.SYS

file. The

values for

FILES

and

BUFFERS

are not in effect until you do.

Use the following procedure if Access Manager is installed on your host
PC and you want to upgrade to the current version.

To update an existing Access Manager system:

Enter

Updating an
existing Access
Manager system