Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 357)

TABS Protocol Configuration
Access Manager 2000 User Manual B-5
TABS Protocol Configuration
The switch configurations for a Hayes Smartmodem

1200 or 2400
connected to a CSU or Controller operating in the TABS mode are
detailed in Tabl eB-3, “ Modem Configuration for TABS Protocol,” on
page B-6. The modem at the Access Manager end should be configured
per Table B-1, “Modem Configuration for OSI Protocol (DTR Lead),” on
page B-3. For further information, see the user manual for the modem.
Note that the CSU or Controller is limited to 1200 baud when configured
for TABS.
The following CSUs and Controllers will only work in the TABS mode:
■
551VST List 1, 1/A, 1/ B
■
551VST ML List 1 Controller
■
551VST List 2 in TABS mode (installed in Access Manager as a
551VST 1/B)
CAUTION
The 551VST List 2 CSU should always be configured to perform
automatic configuration during power-up. Otherwise, a service
interruption may occur.
!