beautypg.com

Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual

Page 130

background image

Configuring the T1 Network

5-6

Access Manager 2000 User Manual

If a connection can’t be made, you’ll get an error message.
Check for the fault.

If a successful connection is made from Access Manager 2000
to the node controller, the Element Configuration Menu appears.

3.

Menu used:

Main

/

Configuration

/

Element

/

Edit

If connected to a standalone CSU, configure the options for that
CSU. If connected to a multiline controller, sequentially select and
configure each CSU you’ll use in that multiline shelf.

If you are using an Access System CSU with a DIU, configure your
near end DIU parameters now.

4.

Menu used:

Main

/

Configuration

/

Node

/

Add

Generally, each near-end CSU is paired, over the network, with a
far-end CSU. Before you can configure a far-end CSU, you must
define its node. Access Manager 2000 will communicate with the
far-end node and CSU over the Facility Data Link.

Configure the near-end CSU parameters.

Near-end node

Access Manager 2000

Node controller

C
S
U

DIUs

Configure the far-end node parameters.