Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 89)

Configuring the site
Access Manager 2000 User Manual 4-3
Configuring the site
Configuring the site includes the following activities:
■
Differentiating the site (pag e4-3)
■
Configuring the report printer (pag e4-5)
■
Configuring the on-line data printer (page 4-8)
■
Specifying the alarm destination (page 4-8)
■
Setting the performance data polling hour (page 4-11)
■
Assigning database allocations (page 4-12)
■
Assigning comline definitions (page 4-14)
To configure the site, you’ll need to access the Installation Menu from the
Utilities Menu.
■
From the Utilities menu, select Installation . The Installation
Menu will appear.
To differentiate the site, you need to assign the node a site name and a
manager type.
The site name that you assign during this procedure will subsequently
appear in the upper left corner of the monitor screen. Until you define the
site name, the words
NOT YET DEFINED will display on the monitor
screen.
Differentiating the
site