Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 309)

Activating/Deactivating CSU loopbacks
Access Manager 2000 User Manual 8-39
The Code Violations-Line register. (See ANSI T1M1.3). These
registers are not available for reset in the AS2000 or ConnecT1 Plus
CSU circuit elements.
■
Far end CV-P Events Register:
The Code Violations-Path register. (See ANSI T1M1.3). These
registers are not available for reset in the AS2000 or ConnecT1 Plus
CSU circuit elements.
CAUTION
Resetting the 1-hour and 24-hour User Performance Data Registers
affects the collection of data stored in the Performance Data Log. If
you do not record this operation in your network management
notebook, you are likely to interpret the Performance Data Log
incorrectly.
3. Perform one or more of the following:
• If you want to reset the selected registers in the first CSU in the
range, press
.
• If you want to reset the selected registers for all the CSUs in the
range, press
.
• If you want to return to the previous menu without resetting
registers, press
.
When you press or , a reset warning message appears.
Confirm that you want to reset the registers and clear the data.
If the selected set of registers to test are not equipped, an error
message to that effect appears after you confirm the reset by typing
Y .
4. This completes the Reset User Registers procedure.
Activating/Deactivating CSU loopback
This section deals with activating and deactivating loopbacks.
!
F5
F6
F2
F5 F6