Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 260)

Analyzing Performance Data
7-10 Access Manager 2000 User Manual
• If you chose Route in Step 8, the Select A Route screen
appears. Place the cursor at the route to be analyzed, and press
. All the circuit elements associated with the route are
listed.
9. The Select A Circuit Element screen appears after a period of time
dependent on the size of the record log.
If, instead of getting this menu, you get a message that there is no
detail data, you cannot analyze the performance data. There are
three possible reasons for this message:
■
The circuit elements associated with the selected node, location,
route or circuit have no data that meets the filter’s minimum
criterion. (That is, a circuit element is only listed for further analysis
if it has a percentage of availability and percentage of error-free
seconds less than or equal to the minimum of the filter.)
■
The circuit elements associated with the selected node, location,
route, or circuit are not configured.
■
No data was collected by Access Manager for one or more of the
following reasons:
• Access Manager was not operating during the time period
selected.
• Polling was disabled for the time period selected.
• The Installed and Operational option in the
selected node and/or circuit elements are set to NO .
• The Retrieve Performance Data option for the circuit
elements (associated with the selected node, location, route, or
circuit) are set to
NO .
Enter