Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 301)

Displaying Telco and User data
Access Manager 2000 User Manual 8-31
Note: SMDS CSU capability, provided by the DIU 2132, is discussed in
a separate manual.
You are presented with the Retrieve performance data screen.
3. Select one of the EQP or network options listed, and press .
The screen which appears will display either 1-hour o r 24hour data
for the first circuit element defined in the access range.
The presentation format is identical for all registers. The columns
displayed are appropriate to the type of register set selected.
If data for some registers are not available (typically because the circuit
element accessed through the node does not support those registers), the
registers appear as
N/A in their respective columns. However, if all the
registers for an interval are unavailable due to resetting or disabling of the
registers, that interval is not shown.
If multiple intervals contain all-zero data, they are shown as To and
From intervals, with the time shown as the start time of the latest
interval (lowest numbered interval).
Enter