Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 273)

Selecting a node
Access Manager 2000 User Manual 8-3
• If you selected an AS2000 type node, you will see this screen.
The sub-menu you see displays a list of access options. These
options let you access the node and perform a variety of operations.
The options listed in the On-line Menu depend on which type of
single-line or multiline node is accessed.
The single-line CSU node types do not have the Display or
Access Range options in their On-line Access menus.
Furthermore, a 551VST List 1/A doesn’t have the element status
display capability. When the far-end status is displayed via the
key combination, the near-end CSU status reappears.
3. Select the option you want and press . You will see another
screen that corresponds to the option you selected.
Since the functional specifications of the various Verilink access systems
differ, Access Manager presents a different set of menus for the two basic
types of nodes.
These two types of nodes are:
■
AS2000 type node (includes Access System 2000 and ConnecT1./
Plus hardware; ConnecT1 Plus is a low-cost Dual-Line Shelf
implementation of the AS2000 system). AS2000 and ConnecT1
Plus menus are used almost interchangeably in this chapter. This
chapter will also reflect these similarities by showing the ConnecT1
Plus model name and number in parentheses: For example, NCC
Ctrl
Enter