Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 377)

Installing a DigiCHANNEL MC/4 or MC/8 and Editing
Access Manager 2000 User Manual D-7
CAUTION
Do not install software drivers provided by Digiboard for the MC/4 o
MC/8. Since Access Manager has its own drivers for these boards
using the Digiboard drivers will prevent Access Manager from
working with the MC/4 or MC/8.
5 COM6 DBA0H 3H DBC0H 10H
6 COM7 DBA8H 3H DBC0H 20H
7 COM8 DBB0H 3H DBC0H 40H
8 COM9 DBB8H 3H DBC0H 80H
Port Address RangeShared I/O Status Port Address
DB80H - DBBFH
DC00H - DC3FH
BB80H* - BBBFH
BC00H - BC3FH
AB80H - ABBFH
AC00H - AC3FH
CB80H - CBBFH
DBC0H
DC40H
BBC0H
BC40H
ABC0H
AC40H
CBC0H
NOTE 1. Two DigiBoard DigiCHANNEL MC/4 and MC/8 boards are presently usable with Access Manager. Refer to
the appropriate hardware manual for port addresses, IQRs, shared I/O addresses, and status masks. When two (2)
MC/8 are used, do not configure the built-in serial port in Access Manage .
NOTE 2. Page 26 of the DigiBoard manual incorrectly lists the start address as BB00H; the correct start address is
BB80H.
Port No. Comline Nam Port Addr) IRQ
Shared I/O
Addr
Status Mask
!