Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 182)

Configuring the T1 Network
5-58 Access Manager 2000 User Manual
■
551VST ML List 1 or List 2 (with NMC List 1 Controller with
revision 2.3 or earlier firmware) with near-end 4016 List 1 (with
revision 2.3 or earlier firmware) and far-end 551VST List 1/B,
551VST List 2, 4016 List 2, or 4016-R. For operation with Access
Manager, the NMC List 1 Controller must be upgraded to firmware
revision 3.0 or later. The 4016 List 1 CSUs must also be upgraded to
firmware revision 2.4 or later
Configuration Options for 551VST Elements
See the preceding Editing the Circuit Element Definitions section for the
steps required to arrive at the Circuit Element Configuration Options
menus. See the following figures for your module’s menu:
■
Figure 5 -10, “551VST List 1/A Options Menu,” on page 5-59
■
Figure 5 -11, “551VST List1/B CSU Options Menu,” on pa ge5-59
■
Figure 5 -12, “551VST List 2 CSU Options Menu,” on pa ge5-60
■
Figure 5 -13, “NMC L1 with 4016 L2 CSU Options Menu,” on
page 5-60
551VST type CSU
Circuit Elements
Options Menu