Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 257)

Reporting performance data
Access Manager 2000 User Manual 7 -7
5. If you choose S-Use , the Choose Filter Selection Logic screen
appears.
Select from one of the two choices on this screen:
• Select a logical OR function so that the filter logic is met if any
of the thresholds are exceeded per interval.
• Select a logical AND function so that all selected thresholds
must be met or exceeded before the data meets the filter logic for
each interval.
The Select Maximum Threshold(s) screen appears.
You may choose “0” (zero) to disable a threshold check, or you may
choose a time interval between 1 and 900 seconds in any 15-minute
interval.
Type in the threshold settings, and press to store them. Only
those intervals that have at least one parameter exceeding the
thresholds (if you selected an OR function) or have all parameters
exceeding the threshold (if you selected an AND function) appear.
F5