Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 252)

Analyzing Performance Data
7-2 Access Manager 2000 User Manual
Effect of Changing a Node Name
When you change a node name with the Node Configuration screen, this
change will not automatically carry over into the circuit definitions.
Therefore, a valid analysis of the performance records of circuits cannot
be performed.
You must change the node name individually in each circuit. If you don’t,
you will have missing or invalid configuration data, as shown below.
Be careful when trying to correlate database analysis over extended
intervals. Changes to the node name and circuit definitions should be
considered when setting the time and date ranges of the analysis.
Reporting performance data
To report performance data:
1. Starting from the Main Menu, select Database Access . The
Database Access (Performance Database Analysis) screen appears.
2. From this screen, select Report . The following screen appears:
Use the procedures to select the performance data you want. You must
begin with the first step in this procedure to ensure that the Performance
Data Analysis Reports are compiled properly.
Node Name is missing