Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 112)

Configuring Access Manager
4-26 Access Manager 2000 User Manual
To add a user definition:
1. From the Revise User Definitions screen, select Add . The screen
labeled Add New User now appears.
2. Enter the user name, password, and access level. Choose one of the
following options:
To save the definition, press .
To exit without saving, press .
3. The user names, passwords, and access levels are encrypted in the
database to prevent viewing them with an ASCII file editor.
The default user definitions shipped with the Access Manager database
include the following:
■
User Name: LEVEL4
■
Password: TEST
■
Access Level: 4
The default access level for all new users is Level 1.
Not all of the options are displayed on some sub-menus for users with an
access level lower than LEVEL4. For example, the following two figures
show two typical screens that appear for LEVEL1 access users.
Figure 3-6 Utilities Menu for a LEVEL1 Use
Adding a user
definition
F5
F2