Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 167)

Configuring nodes
Access Manager 2000 User Manual 5 -43
5. Type Y to delete the node, or press any other key to abort the
deletion.
The view option of the Configuration: Node screen lets you look at the
node’s configuration without changing the current settings.
To view a node definition without changing it:
1. From the Configuration: Node screen, select the View option. The
Configuration menu will appear.
2. From the Configuration Menu, select Revise Node
Definitions by typing N . The Configuration: Node screen
appears.
3. Type V to select the View Node Definition option. The
Select Node to View screen displays the Access Manager nodes the
same as in the Select Node to Edit screen.
4. Use the directional keys to position the cursor at the node you wish
to view.
5. Press to select that node. The detailed node definition now
appears.
If you’re using a color monitor, the text appears in red to show that no
editing is allowed when in the viewing mode.
A single node and its circuit element definitions can be printed by using
the
Print option.
To print the nodes configuration settings:
1. From the Configuration Menu, select the Node option to go to the
Configuration: Node screen.
2. Select the Print Node Definitions option by typing P .
The Select Node to Print screen now shows the nodes in the same
manner as the Select Node to Edit screen.
3. Use the directional keys to position the cursor at the node you wish
to print.
Viewing a node
definition
Enter
Printing a node
definition