Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 55)

Software Installation
Access Manager 2000 User Manual 2-5
Two working files are generated during Access Manager operation. The
files function as transaction files for various program functions and to
allow restoration of the database in case of power loss or a computer
reset. They are:
Note: Refer to the README.DOC file on Access Manager Diskette # 1
for last-minute information and any restrictions placed on the
Access Manager revision being installed.
Use the following procedure if you are installing Access Manager for the
first time and if you have never installed Access Manager on your host
PC.
To install a new Access Manager system:
1. Insert Diskette # 1 into drive A: (or another floppy diskette drive).
2. To access that drive, typ e A: (or the other disk drive name) and
press .
3. At the A: prompt, type INSTALL and press . The
INSTALL program’s main menu then appears.
4. Select the Database Stats option, and verify that you have at
least two megabytes of space available on the hard disk.
5. After verifying disk space, the INSTALL program’s main menu
reappears. Select the Install option.
6. Respond to the subsequent prompts to complete the installation of
Access Manager in the AM2000 directory.
7. Before starting Access Manager, you must verify the location and
content of your CONFIG.SYS file.
Verifying the CONFIG.SYS file
For Access Manager to run, you must have a CONFIG.SYS file which
satisfies two requirements. It must:
VISTA.TAF VISTA.LOG
Installing a new
Access Manager
system
Enter
Enter