Caution – Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual
Page 185

Configuration Options for 551VST Elements
Access Manager 2000 User Manual
5
-61
CAUTION
The 4016 List 1 CSU circuit elements can be soft-configured using
Access Manager. However, service interruption may occur if the soft
option settings do not agree with the hardware switches on the 4016
List 1 printed circuit boards. This occurs only when the 4016 List 1
recovers from a power failure and reconfigures itself according to the
hardware switch settings. Therefore, you should configure all 4016
List 1 CSUs so that the hardware switch settings on the CSU agree
with the soft options you choose in Access Manager.
The configuration options for 551VST-type CSUs are summarized in the
following table:
Table 5-7
Configuration options for 551 VST-type CSU
KEY:
= available
= available in some revisions =
not available
standalone CSUs
551VST-type CSU configuration
option
List 1/A
List 1/B
List 2
4016-R
4016 L1 4016 L2
Installed and Operational
Retrieve Performance Data
Retrieve Far-End Performance Data
Enable Alarm Reporting
Enable Remote Configuratio
BER Threshold
Repeater Loopback Timeout
Enable Far-End Pollin
Enable Transparent Mode
Use FCC Part 68 Rule Only
AIS (Not Signal) Loopback
AIS (Not ESS) Keep-Alive
Enable Alarm Latch
Enable PRM
Enable Span Side B8ZS Encode
Enable Span Side B8ZS Decode
Regenerate CRC to Span Side
Span Side ESF Framing
a
Enable YEL Transcode to Span
Enable EQP SIde B8ZS Encode
!