Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual
Page 104

Configuring Access Manager
4-18
Access Manager 2000 User Manual
The following data entry fields appear in the Add Comline Definition
screen:
To display the access arrangement(s):
1. Place the cursor on the
Access Arrangement
option.
2.
Press
.
The
screen
showing
possible
access
arrangements
appears.
Field Name
Meaning
Comline name
The Comline name can be COM1 through COM16. No
other values are accepted by Access Manager.
Port Addr
This is the port address of the serial interface. Refer to
the manual supplied with your computer or to
Appe ndixD, "Installing Serial Ports" for this address.
IRQ Number
The IRQ number is the interrupt request number of the
serial interface. For the IRQ number, refer to the manual
supplied with your computer or to Appe ndixD,
"Installing Serial Ports".
Baud Rate
This field specifies 1200, 2400, or 9600 baud for use by
the serial interface.
Access Arrangement
Access Arrangement specifies the type of connection at
each serial ports of the Access Manager PC. All of the
comlines, except
SERIAL DEVICE, are connected to
nodes or devices to which nodes are connected. The
SERIAL DEVICE connection services another compute
or an Accumaster.
Further details are outlined below.
F8