Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual

Page 76

Using Access Manager

3-10

Access Manager 2000 User Manual

Table 3-3

Special key definitions in PC mode

Key

Pressing the

key either selects the option

highlighted by the current cursor position from a menu
screen, or accepts the value of data entered into a
selected field. If less than the maximum number of
characters are entered in a field, press t
complete the entry for that line and move the highlight to
the next line.

The following four choices require the

key to be pressed and held while pressing the

second key. The

key is displayed on the

Function Key Definition screen and many othe

screens as (^).

Next Element Press the

key combination to select the

next circuit element in a selected range. This key name
appears on the screen as -.

Previou
Element

Press the

key combination to select the

previous circuit element in the selected range. This key
name appears on the screen as -.

-Arrow>

Near End

Press the

key combination from the On-

line screens to select the near-end CSU information.
This key name appears on the screen as -Arrow> Near-end.

-Arrow>

Far End

Press the

key combination from the On-

line screens to select the far-end CSU information. This
key name appears on the screen as -Arrow> Far-end.

Press the

key to cancel data input requests on

an operational basis and to exit an option menu without
selecting an option. Also press

to immediately

abort a connection request or print request.

Enter

Ctrl

PgDn

Ctrl

PgUp

Ctrl

Esc