Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 170)

Configuring the T1 Network
5-46 Access Manager 2000 User Manual
Figure 5-8 Configuration: 551VST-ML List 2 Menu
Figure 5-9 Configuration: AS2000 Me
This is the first step in selecting the circuit element(s) to be configured. It
tells Access Manager who is the circuit element’s parent node (i.e., its
node name). The parent node’s name appears in the Current Node block
in the upper right portion of the screen. The node type appears in the
menu title.
If the parent node is a multiline type, the circuit element is selected by
node name [shelf, slot].
If the parent node is a single element type, the circuit element is selected
by node name only. If you are accessing a multiline circuit element
continue in the Selecting a Circuit Element Range section that follows.
Because every CSU (or DSU) has a default value, there is no Add
option in the Configuration Actions Menus. To add a circuit element,
select the
Edit option and choose a parent node; then use
and to choose the plug number which will hold the new
circuit element.
Ctrl
PgUp
Ctrl
PgDn