Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual
Page 264

Analyzing Performance Data
7-14
Access Manager 2000 User Manual
•
If you select the
Print Selected Data
option, the data
printed depends upon what screen you were in when you pressed
. If you were in the Select a Circuit Element screen, a list
of circuit elements is printed. If you were in the Circuit Element
Detail screen, the detailed data for that circuit is printed.
Furthermore, if you were viewing a bar chart, you must reply to
the Select Registers to Print screen before you can start printing.
•
If you select the
Respecify Date/Time Range
option,
you are presented with the Date And Time Range Selection
screen with the range you last selected. After changing the
range, press
to save your selection and then press
to start the data analysis.
•
If you select the
Thresholds
option, you are returned to the
Choose Filter for Performance Data screen. After changing the
exception threshold (that is, the filter), you are given
confirmation that the threshold has been successfully changed.
Depending on the previous threshold selected, you may also be
presented with the
Time and Date Range
screen.
After you have changed the exception threshold and pressed
, the message
THE THRESHOLD HAS BEEN
SUCCESSFULLY CHANGED
appears. After acknowledging
the message, or if no confirmation message is displayed, the data
is analyzed and the Select A Circuit Element screen reappears.
F8
F5
F2
F5