Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 83)

Getting started with Access Manager
Access Manager 2000 User Manual 3-17
After the user password is accepted, the Main Menu appears.
3. You can now perform Access Manager operations as outlined in the
chapters that follow.
4. If this is the first time Access Manager is started, enter the time and
date (See Chapter 4, Configuring Access Manager for more
information about the date and time menus).
5. This procedure is now completed.
To manually start Access Manager from a remote VT100 terminal (or
equivalent emulation):
1. Turn on and boot up your computer so that the operating system
prompt (usually C:> ) appears on the screen.
2. Type CD AM2000 (or the name you assigned the directory where
you installed Access Manager). Press .
3. If you are using pcANYWHERE III, type ANYWHERE
AUTOMATIC . Press to load the program.
4. If you are using pcANYWHERE to control Access Manager from a
remote VT100 terminal (or equivalent emulation), type
AM2000/BW/VT and press .
Note: The /BW command may be optional for your setup. Refer to
“Creating a batch file for automatic start-up” on p age2-9, for
detailed information on the /BW command.
When Access Manager is started in the VT100 mode, the bottom of
the screen displays escape key sequences instead of function keys.
Starting the
Remote Access
Manager
Enter
Enter
Enter