Hypertherm Phoenix 8.0 - Manual (Page 9)

1
Safety
Product Listings
MicroEdge and Voyager III
Note: This product has been designed and manufactured in accordance with CE and UL Safety
Standards.
UL has successfully tested and listed these products in accordance with the applicable U.S. and
Canadian Safety Standards. File number E178333. Note: Suitable for pollution degree 2
environment only.
This appliance has been successfully tested and listed by CE under the following standards; EN
500081-2 1994, EN 61000-6-2 1999, and EN 55011:1998. Certificate number: Retlif R-3909N
Edge TI
Note: This product has been designed and manufactured in accordance with CE and UL Safety
Standards.
UL has successfully tested and listed these products in accordance with the applicable U.S. and
Canadian Safety Standards. File number E307226.
Additional markings:
1. Use minimum 75° C copper wire only.
2. Use copper conductors only.
3. Suitable for use on a circuit capable of delivering not more than 5000rms symmetrical
amperes, 230 volts maximum.
4. Solid state motor overload protection is not provided on this device.
5. Integral solid state short circuit protection does not provide branch circuit protection.
Branch circuit protection provided by integral LISTED branch circuit protection fuse.
This appliance has been successfully tested and listed by CE under the following standards; EN 500081-
2 1994, EN 61000-6-2 1999, and EN 55011:1998. Certificate number: Retlif R-3909N
Please contact Hypertherm Automation for further safety listing information.