Hypertherm Phoenix 8.0 - Manual (Page 64)

Setups
57
Load Data
Pressing the Load Data soft key will allow the operator to Load stored Auto Gas settings
from diskette, USB memory stick or hard drive for use.
If you save the data, a file is created with G59 codes with the selected valve settings.
Here is an example of the data file where all percentages are set to zero.
G59 V65 B0
G59 V66 B0
G59 V67 B0
G59 V68 B0
G59 V69 B0
G59 V70 B0
G59 V71 B0
Test Cutting Gases
Pressing the Test Cutting Gases soft key allows the operator to test the HD3070 Cut
Gases.
Test Preflow Gases
Pressing the Test Preflow Gases soft key allows the operator to test the HD3070 Preflow
Gases.