Hypertherm Phoenix 8.0 - Manual (Page 580)

573
Mariner ™ offers motion control operation of
up to 12 axes with 1024 I/O signals with
SERCOS Interface, providing a high degree of
flexibility in operation and table configurations.
This control system supports Multiple Sensor
Torch Height Controls, Tilt/Rotate, Dual
Tilt/Rotate and Dual Transverse motion axes
along with direct communication to
Hypertherm’s HD3070 HyDefinition Autogas
Console, HD4070 HyDefinition and HPR
Plasma systems. A unique Laser process
screen directly integrates to Hypertherm’s
FASTLaser head. This product uses type “V”
software.
Touch Screen
The 15” display used in the Mariner control is a
patented IntelliTouch Surface Wave technology
which provides precise drift free touch accuracy
and unsurpassed clarity. Pure glass
construction with tiny transducers on the back
of the touch screen preserves color purity and
works even if scratched. There is no known
wear out mechanism as there are no layers,
coatings or moving parts. IntelliTouch
technology has been tested by the supplier for
more than 50 million touches in one location
without failure.
THC, Joystick and Speedpots
Features for Sensor THC, Joystick and
Speedpots are provided as standard.
Connection and operation information is
provided in the Operators and Installation
Guide provided with this product.
Note: Use of some devices such as USB
memory devices may require loading of a
device driver for operation. Many standard
device drivers are located in the C:\CABS or
D:\CABS\I386 folders.
Mariner™
Mariner
Overview