Hypertherm Phoenix 8.0 - Manual (Page 214)

Library Shapes
207
Notch to Left Side
Enter the distance between the left sides of the part and the notch.
Left Slant Width
Enter the width of the left slant in the notch.
Notch Width
Enter the width of the notch.
Right Slant Width
Enter the width of the right slant in the notch.
Notch to Right Side
Enter the distance between the right sides of the notch and the part.
Notch Height
Enter the height of the notch.
Overall Height
Enter the height of the part from base to top.
Lead-In/Lead-Out Length
Enter the appropriate value to ensure proper piercing (lead-in) and gas bleed-off (lead-
out) to obtain optimum cut quality.
The location for the lead-in and lead-out is fixed, but can be changed by using the
ShapeWizard and then saving the new shape to disk.
Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.