Hypertherm Phoenix 8.0 - Manual (Page 465)

Program Codes
458
The unsupported EIA codes previously noted are ignored when read. Some of these codes may
be supported in the future. Any EIA codes that are not listed above will result in a translator
error upon loading the EIA program. Known EIA codes that will not be accepted include, but
are not limited to:
Pvalue
Program Number
Dvalue Indexed Kerf Operations
Vvalue Internal Variable Load
13B
EIA Comments
Comments may be placed into the part program to be displayed on screen and viewed by the
operator. The comment line must first be preceded by a program stop command (EIA M00
code or ESSI 0 code).
EIA Example:
M00 – Pauses Program
(Comment) – Text to be displayed