Hypertherm Phoenix 8.0 User Manual
Page 306
Manual
299
If you enter incorrect values, press the CANCEL key at any time. After motion has
begun, press STOP on the front panel to bring the machine smoothly to a stop before the
programmed motion is complete.
Rip Cut mode is useful for making a cut along a specified linear path. Motion stops and
cutting action ceases when the new position is reached or when the STOP key is pressed.
If you do not know the exact distance, enter a distance longer than needed in the right
direction, and then press STOP to end the cut.
Manual Options
Press the Manual Options soft key to access the Manual Options screen.
Home Axes
Press the Home Axes soft key to access the Homes Axes screen.
View Sheet/View Part
View Sheet allows you to view a part as it would appear on the plate. After you press the
View Sheet soft key, the display window zooms out to show the part in relationship to the
entire plate.